U-Line 3018CLR SERIES Przewodnik Instalacji Pobierz pdf (Strona 7)

u-line.com 5

Units have a zero clearance when the door to open 90°. Overlay

models will need additional space for any knobs or pulls installed on

the overlay panel / frame. Stainless Steel models require 2" door

clearance to accommodate the handle if installed next to a wall.

Other Site Requirements

Side-By-Side Installation

Cut-out width for a side-by-side installation is the total of the widths

listed under Cut-Out Dimensions in each unit’s Installation Guide.

No trim kit is required. However, a 1/4-inch (6.4 mm) of space needs

to be maintained between the units to ensure unobstructed door

swing.

Units must operate from separate, properly grounded electrical

receptacles placed according to each unit’s electrical specifications

requirements.

Power Supply

The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A

circuit (normal household current). See Electrical Specifications.

Environmental Requirements

The units are designed to operate between 50°F (10°C) and 100°F

(37°C). High ambient temperatures (100°F [37°C] or higher) may

reduce the unit’s ability to reach low temperatures and/or may also

reduce the ice production rate for those models with icemakers.

For best performance, keep the unit out of direct sunlight and away

from heat generating equipment.

In climates where high humidity and dew points are present,

condensation may appear on outside surfaces. This is considered

normal. The condensation will evaporate when the humidity drops.

5 Door Swing Dimensions

Wall

90°

Door Swing

90°

Door Swing

Space Required

For any Knobs or Pulls

2" MIN

(51 mm MIN)

20-3/4"

(527 mm)

20-3/4"

(527 mm)

20-1/4"

(514 mm)

20-1/8"

(511 mm)

Overlay

Stainless

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Komentarze do niniejszej Instrukcji

Brak uwag

U-Line 3018CLR SERIES Przewodnik Instalacji Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie U-Line 3018CLR SERIES