U-Line ADA15IM Instrukcja Naprawy Pobierz pdf (Strona 14)

12 ADA15IM

ADA SERIES

Troubleshooting Guide

DANGER

ELECTROCUTION HAZARD

Never attempt to repair or perform maintenance on

the unit until the main electrical power has been

disconnected.

Troubleshooting - What to check when problems occur:

PROBLEM POSSIBLE CAUSE REMEDY

The unit frosts up. High ambient temperatures or

humidity

Defrost unit manually (See MAINTENANCE;

DEFROSTING).

Unit is a manual defrost unit. Model BI2115 is a manual defrost unit (See

MAINTENANCE; DEFROSTING).

Door gasket not sealing properly Adjust door (See MAINTENANCE; DOOR ALIGNMENT

CHECK AND ADJUSTMENT and DOOR REVERSAL).

Water is leaking out the back of the

unit.

Water supply connection leaking Tighten fitting as required.

Ice cubes sticking together Infrequent use of cubes Break apart cubes.

Noise during operation Copper water supply tubing

contacting internal components

Carefully bend tubing away from cabinet and

components.

Certain sounds are normal. Soft sounds from the fan and ice dropping from the ice

maker will be heard.

No ice Bin arm locked in upright position Lower bin arm.

No water to unit Turn on water or contact plumber.

Not enough ice Ice cube size too large Set cube size smaller (See MAINTENANCE; ICE MAKER;

ICE CUBE THICKNESS ADJUSTMENT).

Dirty condenser coils Clean condenser (See MAINTENANCE; CONDENSER

CLEANING).

Airflow to front grille blocked Airflow must not be obstructed to front grille (See

OPERATION).

Temperature not set cold enough Set control to cooler setting (See OPERATION). Allow 24

hours for temperature to stabilize (See OPERATION).

Water leaks into ice bucket. Water level set too high Set cube size smaller (See MAINTENANCE; ICE MAKER;

ICE CUBE THICKNESS ADJUSTMENT).

1 2 ... 9 10 11 12 13 14 15 16

Brak uwag

U-Line ADA15IM Instrukcja Naprawy Strona 14